Application of Electrically-Conductive Epoxy in No-Insulation Coils for Controlling Contact Resistance

This article presents a partial-depth impregnation method using electrically conductive epoxy composites in high-temperature superconductor (HTS) coils. In a previous study, we proposed a wet winding technique using electrically-conductive epoxy composites to control the contact resistance of no-insulation (NI) HTS coils. In that method, the epoxy composites were applied across the entire contact surface between winding turns, allowing the contact resistance to be controlled by adjusting the mixing ratio of electrically-conductive powder. However, this approach led to significant current degradation due to delamination caused by thermal contraction mismatch between the epoxy composites and the HTS tape. The partial-depth impregnation method addresses this issue by allowing the epoxy composites to penetrate only partway between winding turns, thereby minimizing critical current degradatio…